English 
4PCS Monitor Connector for Kobelco SK200-6 SK200-6E Excavator
If diagnosis has led you to the wiring, the Monitor Connector gives you a complete, new connector for Kobelco SK200-6, SK200-6E excavators instead of a patchwork of repairs on old, brittle wire.
Part Information
- Part Name: Monitor Connector
- Condition: Aftermarket new
- Product Weight: 1 kg / 2.20 lbs
- Brand: TOPARTS
- Feature: Quality checked before shipping; built for heavy-duty use
Applicable Models
Kobelco SK200-6 SK200-6E Excavator
What This Connector Does
Repairing a damaged plug is often far cheaper than replacing the whole connector. These replacement connectors let you restore the faulty joint and keep the rest of the existing wiring in service.
Connectors and plugs are where most electrical faults begin. Over time, housings crack, locking tabs break and terminals corrode, especially on machines that work in mud, rain or washdown environments.
Kobelco excavators are valued for fuel efficiency and smooth hydraulics, both of which depend on accurate electronic control and clean signals through the wiring.
Keeping the New Connector in Good Shape
Replace damaged clamps and protective sleeving whenever you find them. A connector that is allowed to move against the frame will wear through eventually, no matter how good the wire is.
Signs Your Connector Needs Replacing
Watch for these symptoms:
- Green corrosion on the terminals
- Cracked housings or broken locking tabs
- Plugs that pull apart under vibration
- Intermittent electrical faults on the circuit
Intermittent faults like these are classic signs of ageing wiring, and they rarely improve on their own.
Before and During Installation
- Cut back to clean, bright copper before fitting the new connector.
- Crimp terminals with the correct tool rather than pliers.
- Seal the joint with heat-shrink tubing to keep moisture out.
FAQ
How do I know it will fit my machine?
Match the part number on your old connector, or send us your machine model and serial number and we will confirm before you order.
Is this a genuine or aftermarket part?
Please see the Condition line in the specifications above. Every part is checked for fit and continuity before shipping.
Confirming Fitment
Model names are not always enough to confirm fitment, because manufacturers sometimes change connector designs within a model's production run. Check the part number on your existing connector, or send us your machine model and serial number, and we will check it for you.
Ordering Information
- Payment Method: PayPal, Stripe, Credit card, Visa, etc.
- Shipping Method: DHL, FedEx, UPS, TNT, USPS EMS, etc.
- Track Your Order: An email containing the tracking number with a link will be sent to you as soon as it ships.
Note: Please verify your part number and match our product pictures to your original item before ordering. If you have any questions, please feel free to contact us. Thanks.
